Window-Mounted Cat Hammock with Suction Cups and Breathable Oxford Fabric

WINDOW-MOUNTED CAT HAMMOCK

Elevated Resting Platform with Suction Cup Installation

This window-mounted cat hammock provides an elevated resting and viewing area for indoor cats.

The product combines a breathable Oxford fabric surface, a lightweight support frame, steel suspension cables and four large suction cups. It attaches to a suitable smooth glass surface without drilling or permanent wall installation.

ELEVATED RESTING AREA

The raised platform gives cats a comfortable place to rest, observe their surroundings or relax near a window.

The rectangular surface provides enough space for most household cats to sit, curl up or lie down.

Always select an installation height that allows safe access and reduces the risk of injury if the product becomes detached.

FOUR-SUCTION-CUP SUPPORT

Four suction cups attach the hammock frame and suspension cables to a suitable glass surface.

Each suction cup measures approximately 8.5 cm in diameter.

Suction performance depends on the cleanliness, smoothness, temperature and condition of the mounting surface.

This product must not be attached to textured glass, frosted glass, cracked glass, loose tiles, painted walls, wallpaper, wood, plaster or other porous surfaces.

STEEL SUSPENSION CABLES

Two steel suspension cables connect the front corners of the hammock to the upper suction cups.

The cables help keep the resting platform level during normal use.

Each suspension cable measures approximately 66 cm.

Inspect the cables, connectors and attachment points regularly for bending, looseness, corrosion or damage.

BREATHABLE OXFORD FABRIC

The resting surface is made from Oxford fabric.

The woven fabric provides a practical and breathable resting area for everyday indoor use.

The fabric cover surrounds the support frame and can be removed when cleaning is required.

LIGHTWEIGHT SUPPORT FRAME

The internal frame supports the rectangular hammock surface.

The frame is assembled from lightweight plastic tubes and connecting components.

Make sure every frame section is fully inserted and secured before installing the hammock on a window.

SPACE-SAVING WINDOW INSTALLATION

The suspended design uses vertical window space and does not require floor placement.

It may be suitable for homes with limited floor space or for cats that enjoy elevated resting areas.

Keep curtains, blind cords, electrical wires and fragile objects away from the installation area.

PRODUCT SPECIFICATIONS

Product Type: Window-Mounted Cat Hammock

Recommended For: Indoor Cats

Main Fabric: Oxford Fabric

Frame Material: Plastic Support Tubes

Suspension Material: Steel Cables

Mounting Method: Suction Cups

Number of Suction Cups: 4

Approximate Hammock Dimensions: 55 × 32 cm

Approximate Hammock Dimensions in Inches: 21.7 × 12.6 inches

Approximate Suspension Cable Length: 66 cm

Approximate Suspension Cable Length in Inches: 26.0 inches

Approximate Suction Cup Diameter: 8.5 cm

Approximate Suction Cup Diameter in Inches: 3.3 inches

Approximate Packaged Dimensions: 32.5 × 19.5 × 7 cm

Approximate Packaged Dimensions in Inches: 12.8 × 7.7 × 2.8 inches

Approximate Product Weight: 460 g

Approximate Product Weight in Pounds: 1.01 lb

Suggested Maximum Pet Weight: Up to approximately 20 kg

Available Colors: Beige, Blue and Purple

Recommended Surface: Clean, Smooth and Undamaged Glass

Assembly Required: Yes

Electrical Components: None

Automatic Function: None

Heating Function: None

PACKAGE CONTENTS

1 × Oxford Fabric Hammock Cover

1 × Support Frame Set

4 × Suction Cups

2 × Steel Suspension Cables

Connecting Parts Required for Assembly

Only one hammock is included according to the selected color.

Cats, windows, furniture, cushions, toys and decorative items shown in product images are not included.

ASSEMBLY INSTRUCTIONS

Lay the fabric cover on a clean and flat surface.

Insert the support tubes into the fabric sleeves.

Connect the frame sections securely.

Pass the steel suspension cables through the designated openings in the fabric.

Attach the upper cable connectors to two suction cups.

Insert the remaining suction cups into the rear frame connectors.

Check that all tubes, cables, connectors and suction cups are properly assembled.

Do not install the product until the frame is complete and stable.

INSTALLATION INSTRUCTIONS

Select a clean, smooth, flat and undamaged glass surface.

Clean the glass thoroughly to remove dust, grease, moisture and cleaning residue.

Clean and dry the suction cups before installation.

Press the two lower suction cups firmly against the glass.

Position the upper suction cups so the suspension cables remain evenly tensioned.

Press each suction cup firmly to remove trapped air.

Check that the hammock is level.

Apply gradual downward pressure by hand to test the installation.

Place a weighted object on the hammock for a short test before allowing a cat to use it.

Remove the test object and inspect all four suction cups again.

Allow the cat to use the hammock only after the installation remains secure.

DAILY USE INSTRUCTIONS

Check all suction cups before every use.

Make sure the glass and suction cups remain clean and dry.

Confirm that the frame is level and the cables are evenly tensioned.

Introduce the cat to the hammock gradually.

Supervise the cat during initial use.

Remove the cat immediately if the hammock moves, tilts or becomes loose.

Do not allow multiple cats to use the hammock unless their combined weight remains within the recommended limit.

CLEANING INSTRUCTIONS

Remove the hammock from the window before cleaning.

Separate the fabric cover from the frame and mounting components.

Wipe the frame, cables and suction cups with a soft damp cloth.

Clean the fabric with mild soap and water.

Do not use bleach, strong chemicals or abrasive cleaning tools.

Rinse away all cleaning residue.

Allow every component to dry completely before reassembly.

Do not reinstall the hammock while the suction cups, fabric or glass are wet.

SUCTION CUP MAINTENANCE

Remove and reinstall the suction cups regularly.

Wash the suction cups with mild soap and clean water when dust or oil is present.

Allow the suction cups to air dry or wipe them with a clean lint-free cloth.

Replace any suction cup that becomes cracked, hardened, warped, discolored or damaged.

Temperature changes and direct sunlight may affect suction performance.

STORAGE INSTRUCTIONS

Clean and dry all parts before storage.

Disassemble the frame carefully.

Store the suction cups flat to prevent deformation.

Keep the product in a clean, dry and ventilated location.

Keep it away from sharp objects, excessive heat, direct flames and prolonged moisture.

Do not place heavy objects on the folded fabric, frame or suction cups.

SAFETY INFORMATION

This product is intended for supervised indoor cat resting only.

It is not a toy, child seat, shelf or carrying device.

Do not install it above stairs, beds, sharp furniture, aquariums, fragile objects or areas where a fall may cause injury or damage.

Do not install the hammock on damaged, loose, textured, frosted or uneven glass.

Do not use the product if the fabric, frame, cables, connectors or suction cups become damaged.

Do not allow cats to chew the cables, suction cups, frame or fabric.

Inspect the installation frequently, especially after temperature changes or prolonged sunlight exposure.

The suggested weight limit depends on correct assembly, suitable glass, proper installation and the condition of every component.

Never rely on the stated weight limit without performing an installation test.

Remove the hammock immediately if any suction cup begins to loosen.

PRODUCT NOTICE

Product dimensions are measured manually and may vary slightly.

Product weight may vary between individual items and production batches.

Actual colors may appear slightly different because of lighting conditions and screen settings.

Suction performance varies according to the mounting surface, installation method, temperature, humidity, cleanliness and duration of use.

The product is not guaranteed to remain attached indefinitely and requires regular inspection and reinstallation.

The suggested maximum pet weight is a general reference and does not guarantee installation performance.